0-30V 2MA-3A AJUSTÁVEL AJUSTÁVEL DC Regulado Kit DIY, conversores de energia, para proteção de limite de corrente de curto-circuito Proteção

0-30V 2MA-3A AJUSTÁVEL AJUSTÁVEL DC Regulado Kit DIY, conversores de energia, para proteção de limite de corrente de curto-circuito

€ 0.67

Montante

Ajuste : Este circuito é uma fonte de alimentação regulada continuamente ajustável com uma faixa de regulação de tensão de 0 a 30 V Ele também inclui um circuito de limitação de saída de corrente para controlar efetivamente a corrente máxima de saída, que é continuamente ajustável de 2 MA a 3 A. Uso seguro : pode limitar a corrente da corrente de trabalho máxima típica no circuito experimental, ativar ousadamente a fonte de alimentação e não se preocupar com a falha ou erro de instalação causado pelo alto dano de corrente ao circuito experimental. Fácil de ajustar : a tensão de saída é fácil de ajustar. O status do limite de corrente de saída é indicado pelos LEDs. Quando a corrente de saída exceder a corrente limite, ele alterna automaticamente para o modo de corrente constante, sobrecarga ou não pode fornecer proteção completa. Desempenho estável : embora a fonte de alimentação de comutação tenha as vantagens de alta eficiência e tamanho pequeno, ele permanecerá inevitavelmente interferência de alta frequência, enquanto a fonte de alimentação linear tem uma interferência muito baixa e um bom isolamento.


Mais dados

Condition:
100% Brand New
Item Type:
Regulated Power Supply Board
Color:
Red
Input Voltage:
24V AC (maximum)
Input Current:
3A (maximum)
Output Voltage:
0-30V continuously adjustable
Output Limiting Current:
2mA-3A continuously adjustable
Output Voltage Ripple:
0.01% (maximum)
PCB Size:
Approx.84x84mm/3.31x3.31in
Package List:
1 x Regulated Power Supply Board1 x Set of Plug-in Metal Film Resistor2 x Resistance Identification Card1 x Set of Plug-in Electrolytic Capacitor + Cement Resistance + Terminal + Governor1 x Set of SCR + IC + Cable + Ceramic Capacitor + Monolithic Capacitor2 x Connector
Note:
1. The radiator and fan are not included in the kit. You can bring it yourself or buy it in the store. There is an external 24V cooling fan connector on the board. The adjustment tube of this circuit must be added with a sufficiently large radiator or fan to operate with load, remember! Otherwise, the adjustment tube may be damaged due to overheating.2. The potentiometer can be directly soldered to the board, or it can be led to the panel installation. The kit is equipped with connecting sockets and connecting wires.3. The power transformer uses 24V AC output (or dual 12V, the center tap is empty, not higher than this voltage), the power can be selected according to need, if you need 30V 3A output, the transformer power needs to be greater than 90W.4. The power supply is a high voltage and high current circuit, please be careful, otherwise it may cause harm to physical safety! This shop only guarantees the correctness of the kit and circuit, and does not bear any adverse consequences caused by the production!

Mais produtos na categoria

Dr. Martens 8053 Oxford
  • Novo

Dr. Martens 8053 Oxford

€ 30.02

Estilo de 5 olho Tornozelo acolchoado Feito com o DNA do DOC clássico, incluindo bordas ranhuradas e costura visível Construído na icônica sola de Dr Martens, que é resistente ao ar, qu